Volunteer and wildelife Tourism Assignment Example | Topics and Well Written Essays - 250 words

Volunteer and wildelife Tourism - Assignment Example Some of the animals which are hunted for trophy in Canada, include the polar bear, Canadian moose, Canada whitetail deer, Canada ducks and many others. This act of trophy hunting has its own impacts socially, economically and even environmentally. The impacts are categorized as either positive or negative impacts to the society, environment and the economy (Novelli, 2005). The advantageous effects of trophy hunting include infrastructure development, which entails a reliable transport system, rural development and increased job opportunities. The job increase is witnessed since many people are needed to protect the wild game. Increased contribution to the Gross Domestic Product (GDP) and government revenue from the businesses related to trophy sales is also another advantage that is accrued from trophy hunting (Novelli, 2005). Noise pollution from the machines used, creation of illegal roads in protected zones and impacts on the sanitation and water resources which affect both the wild game and the aquatic life are some of the disadvantages of trophy hunting (Novelli,

Meat packing industry Essay Example for Free

Meat packing industry Essay Introduction America’s fast food industry was founded by self made man who took risk, worked hard, some not even going to collage. Today the industry relies on a low-paid and unskilled workforce, where a handful are able to rise up the corporate ladder, while the vast majority lack fulltime employment, receive no benefits, and end up quitting after a few months. The fast food industry prospered over the last 30 years because minimum wage was lowered, marking was directed at children, federal agencies meant to protect workers and consumers ended up working for the companies, and corporations worked with congress to oppose laws that didn’t help them. The â€Å"American world view† is embodied in fast food because it takes advantage of those who don’t know any better. Chapter 1 The element of car based restaurants like the ones started in Southern California encouraged the spread of fast food because they had good food, became successful, and were very popular among young people. Chapter 2 Disney and Kroc were similar because they both used science to sell their products, made up famous mascots to sell products and both focused selling to kids. They were different because Disney founded his company, and Kroc bought his, they sold different products, and Kroc wasn’t involved in politics, while Disney was. Their companies cooperated when McDonald’s agreed to sell Disney toys and Disney agreed to allow McDonald’s in Disneyland. The fast food industry started with billboard ads to attract kids and evolved to adverting every where, from TV, to the internet, to school hallways. They also make the restaurants themselves fun for kids with play places and selling toys so they want to go more, and even as adults bring their own kids. Personally, I don’t think it is ethical to advertise in schools because it fast food is unhealthy and kids should be learning that, not that the burgers at McDonald’s get and A in taste. Chapter 3 Most employees of fast food restaurants ate teenagers because most are willing to work long hours with little pay. Fast food corporations relentlessly stop their workers from unionizing by doing things like integrating workers with information about a possible union with lie detectors, or closing locations with unions and opening new locations near by. Working conditions at fast food restaurants are unsafe. Typical dangers the employees face ate slips, fall, cuts, burns, and robberies. Problems are dealt with by increasing security with cameras or more parking lot lights. If I worked at a fast food restaurant and I injured my self, I might not tell my manager because I could loose my job because they could blame me for the injury. Chapter 4 The advantages of starting your own business is if it is successful, you could get a lot of money, not to mention you are your own boss so no one besides the government tells you how to run your business. The disadvantages are the business could be unsuccessful and you could loose a lot of money. The advantages of working for someone else are you do not have to make too many tough decisions. The disadvantages are you will not make as much money as your boss, and you may not like your boss for whatever reason. Some legal issues that fast food franchises have been involved in are the Coble’s Bill which makes franchises obey the principles other companies follow. The Subway fast food franchise was involved in the SBA which helps restaurants by giving them government funds. Subway got involved and made it so they would get extra money. Chapter 5 Family farms are disappearing because industry farms take all the business and close family farms because they have no one to sell to. there are only a few small potato farms left because industries take up all the land and business. The take-over of agricultural farms effects communities because local farms go out of business and communities become dependent on the corporate farm. Chapter 6 Development and fast food farms take land and effects cattle pastures because there is less land for the cattle to graze. Since most cowboys and ranchers have gone out of business, they have become irreverent in today’s culture. The government set up the Sherman Antitrust Act and a congressional investigation in the meet packing industry to help ranchers. Later, the Reagan administration allowed the top four meat packing firms to merge and they took over the cattle markets. Corporate domination affected family farms by forcing them to work for them or go out of business. Self-reliance is still a viable goal for Americans, but has become very difficult because of big corporations. The fast food industry makes chicken farmers work for them or they would get no business. In farm culture, the land is a tangible connection to the past, meant to be handed down and not sold. To native Americans, the land meant life and prosperity. In traditional Irish culture, the land is a link to past generations and to loose the land meant to fail your relatives. Their concept of land is similar to the American concept. Chapter 7 The demands of the fast food industry changed towns by making is so almost everyone ends up eating fast food because the industries are aloud to put their restaurants wherever they want and advertise as much as they want until the town’s economy runs on the fast food restaurants. Chapter 8 Meatpacking is dangerous because of the machines and rarely cleaned cutting tools. Since a meatpacking manager’s bonus is based in part on injury rate, many injuries go unreported and the worker is either given an easer job to takes time off to recover. Chapter 9 The meat packing and meat processing industry has been a spreader of disease because the animals are not screened well enough or sick workers spreading disease on the animals. After reading about the pathogens in hamburger meat, I am concerned about food poisoning in fast food. E. coli is not common in restaurant food, but is likely to be in hamburger meat. Chapter 10 Many Americans are obese because of lack of information and improper food laws. Fast food probably plays a big part in obesity because it provides unhealthy food to almost every where. Americans are probably more obese than other countries because fast food started here. Fast food companies increase the size of their meals to effect the calorie count look better for the per serving part. This effects American health because it is misguiding and you eat more than you thought you were going to. People in other countries do not want fast food because they have seen its effect on America. Epilogue The free market Schosser talks about leaves workers unprotected with little interference from the government. In the quote, Schosser is referring to the free market. I agree to what Schlosser says on 216. I believe the government needs to work harder to protect both the workers and consumers of fast food. At the end of the Epilogue, the author remedies his criticisms with the fact that it is a persons choice to eat want. Afterword Mad Cow disease is a disease that slowly destroys the brain and can be spread through hamburger meat. It can be controlled by feeding cows grass instead of corn and hormones, and inspecting the meat better. Cattle get infected by it because they stand in the dung of an effected cattle. It is a very serous threat to humans.

Rate of Conversion of Nitrogen Oxide (NOx) into Nitrogen

Rate of Conversion of Nitrogen Oxide (NOx) into Nitrogen 1.1 Chapter Introduction: This chapter gives some basic information of the thesis. Firstly, some background information about selective catalytic reduction(SCR) technology, aqueous and dry ammonia, NOx gas and its conversion. Secondly the reason and the motivation for choosing this research project. Then the aim, objectives and methodology is described. Finally, the progress of project, plan and the conclusion is given. 1.2 Background Information: 1.2.1 Selective Catalytic Reduction(SCR) Technology: SCR technology is an advanced emission control technology used to reduce the quantity of hazardous gases that come out through the exhaust of a diesel engine. It injects a reducing agent into the exhaust of a diesel engine with the help of a catalyst. The reducing agent is usually automotive grade Urea and it is known as a Diesel Exhaust Fluid (DEF). A chemical reaction occurs that converts the Nitrogen Oxides(NOx) into Nitrogen, water and carbon dioxide. SCR technology is made to allow the exhaust gases pass through the reducing agent to take place a chemical reaction in an oxidising atmosphere. The Selective word is used because it reduces the amount of NOx using a reducing agent in a catalyst system and the chemical reaction is called as Reduction where the DEF is a reducing agent that sets a chemical reaction with NOx and converts it into nitrogen, water and carbon dioxide (CO2) Figure 1 SCR System (Howard, n.d.) This technology is the most cost effective and fuel efficient technology used to reduce the emission of a diesel engine. The diesel truck engines produced after January,2010 must meet the new EPA standard. SCR reduces NOx emission up to 90% while on the other hand reducing hydrocarbon (HC) and carbon monoxide (CO) emission by 50-90% and particulate matter (PM), 30-50%. More emission reduction for PM can be achieved by attaching this system with the diesel particulate filter. SCR system is widely used in a marine vessel, cargo vessels, ferries, tugboats, large utility boilers, industrial boilers, and municipal solid waste boilers etc. 1.2.2 SCR reducing agent Ammonia: Some reductants are used in the SCR system such as anhydrous ammonia, aqueous ammonia and urea. These three reductants are widely available in the large quantity. Anhydrous ammonia is highly toxic and difficult to store, but it does not need any conversion, it can be used as it is to operate in the SCR. Anhydrous ammonia is a compressed liquid form of ammonia which does not contain water in it. Anhydrous ammonia is an important industrial cleaner that cleans the harmful bacteria and shines the industrial metal. The large amount of anhydrous ammonia stored requires more caution and safety. Stronger concentration of ammonia can cause burning and some fatal issues. In 1947, a ship filled with solid form of ammonia called as ammonium nitrate exploded in the Galveston Bay of Texas, resulting in number of deaths. Hence using anhydrous ammonia is SCR system is dangerous. (Lepore, n.d.) Urea is easy and safe to store but it is required to convert into ammonia through thermal decomposition to use as a reducing agent in SCR. Urea is very safe, stable, non-volatile, non-flammable and non- explosive. It can be safely transported, stored and handled. But the disadvantages of Urea are it may cause an extra emission of a nitrogen oxide and carbon monoxide which are harmful gases for environment as well as living organism. It may cause a contamination and corrosion at the point of injection, leakage of Urea may cause a formation of a white precipitate salt and when mixed with a water then the formed Urea solution can cause scaling blockage in SCR system. Aqueous ammonia which is known as ammonium hydroxide must be hydrolysed to be used and it is comparatively safer to store and transport than anhydrous ammonia. Larger volume of aqueous ammonia will be required as compared to anhydrous ammonia to control the same NOx efficiency. Aqueous ammonia is available in a concentration of 19 percent and 29 percent by weight. For the 29% of aqueous ammonia, the volume required 3.4 times that of anhydrous ammonia and for 19%, the volume required is 5.3 times that of anhydrous ammonia. There are some common things between aqueous ammonia and anhydrous ammonia SCR installation. It has storage tanks, pumps and injection valves. The controlling is same that of anhydrous ammonia. (Salib, n.d.) 1.2.3 NOx conversion: SCR technology was established in 1970s and mainly used in stationary sources and still it is measure strategy for the reduction of NO. The high frequency and the ability to react with the NOx selectively to form nitrogen, water and carbon dioxide. When the exhaust gases pass through the SCR system a chemical reaction takes place. The ammonia or other reductant such as urea is injected and mixed with the exhaust gases before entering the catalyst chamber. The following reaction takes place in the conversion of NOx. (Majewski, n.d.) 6NO + 4NH3 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 5N2 + 6H2O 4NO + 4NH3 + O2 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 4N2 + 6H2O 6NO2 + 8NH3 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 7N2 + 12H2O 2NO2 + 4NH3 + O2 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 3N2 + 6H2O NO + NO2 + 2NH3 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 2N2 + 3H2O 2nd equation shows dominant reaction mechanism. 3rd to 5th reactions above include nitrogen dioxide reactant. The 5th reaction is very fast reaction. NO2 is responsible for the promotion of the low temperature SCR in this reaction. In diesel SCR system, the level of NO2 is increased to enhance the conversion of NOx at low temperature. In some reaction water is produced that shows moisture is always exist in diesel exhaust. If the NO2 content increases NO level in the feed gas increases. N2O formations are also possible as shown in the reaction below, (Majewski, n.d.) 8 NO2 + 6 NH3 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 7 N2O + 9 H2O 4 NO2 + 4 NH3 + O2 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 4 N2O + 6 H2O Some Undesirable procedures happening in SCR systems incorporate a few focused, nonselective reactions with oxygen, which is copious in the system. These reactions can either deliver optional emissions or, best case scenario, ineffectively consume ammonia. Partial oxidation of ammonia may deliver nitrous oxide (N2O) or elemental nitrogen, individually. Complete oxidation of ammonia, is shown in the following equation 2NH3 + 2O2 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ N2O + 3H2O 4NH3 + 3O2 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 2N2 + 6H2O 4NH3 + 5O2 à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 4NO + 6H2O The SCR procedure requires exact control of the ammonia injection rate. A deficient injection may bring about unsuitably low NOx changes. An injection rate which is too high outcomes in arrival of undesirable ammonia to the climate. These ammonia emissions from SCR system are known as ammonia slip. The ammonia slip increments at higher NH3/NOx proportions. As indicated by the prevailing SCR reaction, 2nd equation the stoichiometric NH3/NOx proportion in the SCR system is around 1. Proportions higher than 1 altogether increment the ammonia slip. By and by, proportions near 0.9 and 1 are utilized, which limit the ammonia slip while as yet giving tasteful NOx changes. The alkali slip diminishes with expanding temperature, while the NOx transformation in a SCR catalyst may either increment or lessening with temperature, depending upon the specific temperature range and catalyst system, as will be examined later. 1.2.4 Diesel engine exhaust system: The first motivation behind a fumes framework was to securely course fumes gasses from the motor so they can be depleted into the earth, while additionally giving lessening of burning clamor. Fumes gas, nonetheless, contains parts that are hurtful to human wellbeing or potentially the earth. Thus, emanation levels of these fumes gas parts got to be distinctly directed. Since directed discharge levels are regularly much lower than that which can be accomplished through in-barrel control measures, the fumes gas must be dealt with after it leaves the motor. In this manner, while fumes frameworks keep on serving their unique capacities, they have developed into one of the basic components utilized for contamination control and reduction in cutting edge motors. A fumes framework from a diesel traveler auto is outlined in Figure 1. The fumes framework is regularly associated with the ventilation system, which gathers fumes gasses from the motor chambers fumes ports. In light-obligation applications, exhaust systems and diesel particulate channels (DPF) can be put either in the nearby coupled position to the ventilation system (the converter in Figure 1) or in the underfloor position (the particulate channel in Figure 1). The decision of area is controlled by the accessibility of space and the sought temperature profile, with the nearby coupled area giving introduction to the most noteworthy conceivable fumes gas temperatures. The after-treatment gadgets and their channeling are in some cases alluded to as the hot end of the fumes framework, while the suppressors and the tailpipes are the cold end of the fumes framework. The hot end channeling may incorporate the downpipe or front pipe (not present in the design appeared in Figure 1) which associates the ventilation system with the exhaust system, and additionally funneling between the impetus and the particulate channel. The after-treatment framework is associated with the suppressor by the inside pipe The presentation to high temperature, alongside different components, for example, quality necessities and synthetic introduction, decide the decision of fumes framework materials. Debilitate Brakes. Debilitate frameworks may likewise incorporate various segments. Some diesel trucks are outfitted with a fumes brake, which utilizes the fumes gas weight for vehicle braking, to facilitate the requests on wheel brakes and increment their life span. By actuating a throttle valve put in the fumes framework when the motor is creating no yield and braking is required, fumes backpressure and accordingly the torque required to pivot the motor is expanded. In motors furnished with a variable geometry turbine (VGT), the turbine vanes might be utilized to throttle the fumes stream rather than a different throttle valve. The adequacy of fumes brakes can be enhanced with an element that holds the fumes valve open constantly (bleeder brake). This can be proficient with an actuator that pushes the fumes valve and keeps it open through every one of the four motor strokes. Exhaust Brakes: It can be fitted to an assortment of medium-obligation diesel motors including overwhelming get trucks planned to pull moderately substantial trailers. Their application and adequacy is constrained by the greatest weight that the fumes framework segments upstream of the throttling valve can support. Deplete brakes have little effect on fumes framework commotion. Fumes brakes are just a single approach to utilize the motor to help in vehicle deceleration. Pressure discharge brakes-occasionally alluded to as motor brakes- open the fumes valve close to the highest point of the pressure stroke and discharge the packed air into the fumes framework before it can push the cylinder down amid the extension stroke. Pressure discharge brakes are frequently joined straightforwardly into substantial obligation diesel motors, for example, those utilized on Class 8 trucks. They give a fundamentally higher braking impact than fumes brakes without expanding deplete framework backpressure. They are being that as it may, significantly more exorbitant and require exceptional commotion concealment measures to keep away from intemperate fumes framework clamor. Waste Heat Recovery: Future fumes frameworks may likewise incorporate fumes gas vitality recuperation frameworks. In the diesel motor, the fumes gas enthalpy speaks to a critical portion of the synthetic vitality of the fuel-up to more than 30%-which is a standout amongst the hugest wellsprings of warm effectiveness misfortune. Debilitate warm recuperation frameworks may run from basic warmth exchangers to complex advances, for example, thermoelectric. An illustration vehicle with a fumes gas warm exchanger is the 2006 Citroen C4 Picasso, where squander fumes warm exchanged by means of the cooling framework is utilized to even more quickly warmth the lodge. Consider went for utilizing thermoelectric generators to deliver power from waste fumes warm in light-and substantial obligation diesel motors has been supported by the US Department of Energy 1.3 Reason and motivation for the research: Day by day the use of vehicle is increasing rapidly so that the emission of exhaust gases such as CO, NOx and CO2 are also increasing. Ammonia is basically known for being harmful for the environment, additionally adds to the development of particulate matter that has related to unfriendly wellbeing and environmental effects. In industries, the emission of NOx is rapidly increasing and it has become mandatory to control the impact or the emission of such hazardous gases. It may not be decreased but it can be controlled or converted into non-hazardous gases with the help of some reducing agents. Nitrogen oxides (NOx) are an extremely important and essential group of air polluting chemical compound. This clarifies why NOx are critical air toxins and how NOx is formed and react in the air. This notice likewise talks about the standards on which all NOx control and pollution prevention technologies are based; accessible NOx technologies for different combustion sources; and performance a nd cost of NOx technologies. Following are some toxic effect of NOx: It creates photochemical smog It causes acid rain and nitrate particulate It increases the risk of respiratory conditions and increases the response to allergens It causes a formation of ground ozone which is associated with adverse health effect. This thought motivated to design a technology to convert such gases into non-hazardous gases. Because of the expanding awareness with air quality, stricter emission limits have been formed, which will be much further fixed for off-expressway diesel motors in the coming years. Depending upon the application and the area, distinctive emission limits apply. The most stringent emission regulation is as of now forced by the European Union (EU) and the Environmental Protection Agency (EPA) in USA. Nitrogen Oxide (NOx) and (Particulate Matter) are the main focused pollutant on which the technology is being developed. An extra test emerges from the fact that, depending upon the application, distinctive test cycles must be utilized for the confirmation of engines. The engines are worked just in chosen regions of the engine map during particular accreditation runs. Just steady state test cycles are utilized for heavy vehicle engine with a power output more prominent than 560 kW. For versatile machinery engine with a power output beneath 560 kW. During the steady state test cycle, the engine is worked at steady speed and load while the emission estimation is directed. After every emission estimation, the working point is changed and the following estimation will be performed. At long last, the general test cycle result is calculated by a weighted sum of all estimations. During the NRTC test, the motor is worked completely transient, with a constant estimation of the emission. Along these lines, the after-treatment system has additionally to have the capacity to perform under transient conditions. Thi s reality prompts to requirement, e.g. highly exact urea dosing. This can be obtained by using the SCR technology The aim of this research project is to investigate the rate of conversion of Nitrogen Oxide (NOx) into Nitrogen and water when the NOx gas is passed through the reducing agent. Within this aim there are number of objectives: Determine the Mount the test rig. Set temperature and amount of ammonia. Adjust the pressure load of the exhaust gas. Pass the gas through the test rig. Take the 1st default reading without using ammonia and SCR catalytic converter. Attach aqueous ammonia and SCR catalytic converter and again take the readings Testing Conditions at 25%, 50% and 75% of full load of engine The amount of ammonia injection is determined Keep the load of engine constant and increase the flow rate of ammonia and take readings on various flow rate. Increase the load of engine and repeat the same procedure. Compare the readings and plot the graph. The same procedure is repeated to get test results of 5 injection rate and determine the optimum level of ammonia injection. The above procedure is conducted at exhaust gas temperature in range of 300 °C 500 °C and depends on the load of diesel engine. Purchase a SCR catalytic converter and ammonium hydroxide (aqueous ammonia). Second hand SCR catalytic convertor is available on www.for-sale.ie (For-sale, n.d.) Take permission to use the diesel engines and the other required equipment from the college lab. Determine the airflow of exhaust gases based on size of the diesel engine Airflow measurement with the help of U-tube manometer. Measurement of engine speed using RPM indicator. Arrange Rotameter to measure the amount of ammonia released in the chamber. Mount the experimental rig. Solve the errors and find solutions for the problems that will occur during the investigation Hence the progress of the research concludes that the aqueous ammonia is suitable for the conversion of NOx in the SCR system as it is widely available and safest to store. In addition to it aqueous ammonia is inexpensive.

A and P :: essays papers

A and P The Characters of John Updike's "A & P" In "A & P", John Updike develops his characters through the eyes of the main character, Sammy. Sammy works in a grocery store, and one day he observes three young girls as they come into the store. The whole time they are in the A & P, Sammy describes their appearance, behavior, and his impression of them in great detail. Sammy watches each of the girls as they look around the store, but there is one that catches his attention right as they walk in. He is so busy staring at her that he makes the customer he is "ringing up" very mad at him. Sammy describes the young girl as a "chunky kid, with a good tan and a sweet broad soft - looking can with those two crescents of white just under it..."(Updike, 105). He notices everything about the girl, even down to the fact that she does not have a tan line, so she must have just bought the bright green, two piece, bathing suit. He also notices that she is very conscience of being a little over weight, because she "..fumbled with the co okies, but on second thought she put the packages back". Sammy describes the next girl as a pretty girl, but not pretty enough to be called beautiful. He puts great detail in describing her appearance, and describes everything about her, from her long, frizzy hair, to her long neck, and the sunburns underneath her eyes. This girl is the tallest of the three, but he says that while she is " the kind of girl other girls think is very ‘striking' and ‘attractive' but never quite makes it....is why they like her so much". The last girl he describes is the one he thinks is the leader of the three girls, and even calls her the "queen" (Updike, 105). Sammy describes her as being a very self-assured girl, who is trying to teach the other girls how to be just like her. He states that "she had talked the other two into coming in here with her, and now she was showing them how to do it, walk slow and hold yourself straight". Sammy goes into the greatest detail describing the charact er. He talks about the color of her bathing suit, how her straps are pulled down, the style of her hair, and the manner in which she walks across the store.

A Study About German Architecture Essay

My German ascendants are believed to hold come from the northwesterly part of Germany perchance around the metropolis of Hamburg. The metropolis of Hamburg was a major port in the early 1900s and was home to transporting to Africa, East Asia, South America and India. After the desolation of World War 1 on the state, Hamburg lost many of its trade paths and its booming economic system slowed with the remainder of Germany. This made the former extremely popular trade port now a port to the new universe. It is believed that my ascendants came from this country around the clip that the war had ended. I believe they came to the United States in hopes of freedom and a new manner of life. The clime in Hamburg is really mild, in its warmest months of June, July, and August the mean temperature is 70 grades Fahrenheit, while in the coldest months of December, January, and February the norm is 30 grades Fahrenheit. Hamburg is located in the southmost portion of the Jutland peninsula on the Alb e River. Although in their pure signifier hunting and assemblage, every bit good as gardening and pastoralism are non subsistent schemes of today in the German civilization, thoughts from each are used in a more modern manner when it comes to the states usage of agribusiness. Though agribusiness is non the largest subsistence scheme ( about 5 % of labourers work in agricultural ) there is said to be every bit much as 53 % of land in Germany used for agricultural intents. There is about 15 % of pastoral land used for cowss, hogs, domestic fowl and some sheep. Much of the dairy land is found in the southern part of Germany, hogs and cowss are frequently grazing land in the mountain parts. To bring forth the nutrient, milk, and wool these domesticated animate beings provide there are many engineerings used today which were non originally portion of pastoralism. These many types of engineerings used in cultivating animate beings include: a type of fence or lodging to maintain the animate beings c losely confined ( henhouses for poulets ) , machines to assist bring forth and milk the cattles, automatic eating systems are sometimes used to feed the animate beings, round bailer for hay, nutrient bins or silos to hive away nutrients such as grain and hay, unreal insemination kits are used to increase the quality of construct and increase the construct rate, shearing tools are used to acquire the wool off of the sheep, Canis familiariss are besides frequently used to heard the sheep. The division of labour in cultivating these animate beings has shifted over clip from labour intensive and human powered, to more of a technologically goaded system that includes machinery and other powered equipment. Human labour is still needed but non in the capacity as it was in old old ages, human accomplishment is besides a chief portion of the division of labour. A Shearer is needed to clean the sheep of its wool, veterinaries to give shootings and assist maintain the animate beings healthy, e very bit good as trained persons who know how to properly tally and set the powered equipment. Horticultural merchandises that are produced in Germany are dependent on the part of the state where they are adult, as the terrains vary. In the northern part and parts of eastern Germany you will happen merchandises such as sugar Beta vulgariss and cereals ( grain corn and corn-cob mix ) which make up about 56 % of the cultivable land. 17 % of this cultivable land is inhabited by eatage harvests, largely in parts where population is scarce. Industrial harvests such as oil-rich seeds, hops, baccy, herbs, and spice workss are produced on about 15 % of this cultivable land. Approximately 12 % of the cultivable land is fallow or produces root harvests such as carrots and yams. Vegetables and fruits such as grapes used to do vino compile around 1 % of the cultivable land and are found in the hills of the many coastal river metropoliss that are really common in Germany ; most of which prevarication on the Rhine and the Mecca rivers. There are many agricultural engineerings used to acquir e the most out of these harvests with every bit small aid from the human manus as possible. Large machines such as combines, tractors, harvest plantation owners and ploughs allow for the usage of a few human custodies and supply the ability to reap many acres.A Irrigation systems are used to assist the harvests grow and are frequently set up in Fieldss like overhanging sprinkler systems, fertiliser is used to maintain the dirt rich and is modernly used in liquid signifier and is by and large held in a armored combat vehicle that is attached to either a tractor or harvest plantation owner, seeders which are used to works the harvests, there is besides other cultivated land and reaping equipment available for usage. The division of labour is separated by physical labourers who rely on human power to make things such as picking stones and puting up irrigation systems to trained workers who operate the heavy machinery. Most of the farms where this takes topographic point are household o wned and run on less than 150 estates. More than 75 % of the land used to cultivate harvests and animate beings in Germany is found in the western part, this land allows for the state to provide themselves with about 80 % of their one-year nutrient demands. Germany is one of Europe ‘s top industrial powers and is besides Europe ‘s prima exporter of vehicles, chemicals and machinery. Its strongest industrial countries are vehicles, chemicals, machinery, machine tools, steel, Fe, coal, and a certain drink – beer. Top companies in the German auto industry include BMW, Audi, Porsche, Mercedes, and Volkswagen. These companies help Germany remain near the top of the universe ‘s automotive industry. The fabrication of these autos is done in assembly and production mills where the usage of machinery, robotics, every bit good as human accomplishment and labour are the chief divisions of engineering and the assembly line is the most common signifier of production. The division of labour in the automotive industry includes extremely educated and skilled workers who work in the assembly workss as the applied scientists and directors. There is besides pay labourers, most of which work straight on the line bring forthing part s that help set your auto together from its engine constituents, to axles, to organic structure casting. Other pay labourers include those who adhere windscreens, install Windowss, tyres and other pieces that when set together do up your German car. The electronic revolution is really prevailing in Germany and much like the United States and the remainder of the universe is tilting towards the usage of information engineering to garner information of many different topics. These information engineerings include things such as banking where you can put up direct sedimentation with your employer every bit good as keep path of your personal fiscal history information and touristry which allows you to do travel programs without the usage of an agent. Other information engineerings include transit, instruction, gas pumps, and the largest of all communicating by manner of the cellular phone. Cell phones allow people to pass on from any location at any clip of the twenty-four hours, they are besides now frequently used as nomadic computing machines which merely increases their convenience. For these nomadic communicating devices to work decently engineerings include computing machine hardware and package to pull off the different cell phone histories, every bit good as towers and orbiters to supply a signal and frequence for these phones to be expeditiously used. The division of labour includes IT people, who create and maintain web sites and computing machine scheduling, physical labourers who are used to put up the towers and do other necessary field work, every bit good as directors who run the twenty-four hours to twenty-four hours retail operations and gross revenues people who sell the phones and supply information to accepting people a companies. The German political system is a centralised system which means people yield their sovereignty to this centralised authorities by following regulations and Torahs that have been laid out for the citizens to follow. Germanys Basic Law or Constitution divides the power of authorities into three subdivisions. They have a bicameral parliamentary legislative assembly which includes the federal council besides known as the Bundesrat, which holds 69 members, all of which are nominated by the province and the Bundestag ( federal assembly ) which has over 600 members who are elected by popular ballot to a four twelvemonth term. The executive subdivision is made up of the President ( head of province ) and Chancellor ( caput of authorities ) . The president is elected to a five twelvemonth term by the federal assembly and an equal figure of delegates from each province parliament, while the Chancellor is elected to a four twelvemonth term by the federal assembly. The Federal Constitutional Cou rt is elected every bit by both the Bundestag and Bundesrat and do up their judicial subdivision of authorities. Germany uses negative reciprocality when it comes to their informal economic and personal manner of interchanging goods and services. This means that the individual who is supplying the good or service is gaining from the dealing more so than the receiving system or purchaser. Economic exchange comes in the signifier of market exchange where there is a excess of goods that are sold for a net income and is based on the degrees of supply and demand. Germany is officially based on the economic system of capitalist economy, which promotes economic growing. Capitalism is when goods, services, labour, and resources are sold off for a net income at market where benefits travel to both the buyer and provider, even though the provider is gaining the most. The dislocation of economic sectors in Germany include 72 % third or service, about 27 % secondary or fabrication, while merely about 1 % is primary or the extraction of natural stuffs. The GDP per capita fell from $ 35,900 in 2008 to $ 34,200 in 2009, while the unemployment rate rose from 7.8 & A ; in 2008 to 8.2 % in 2009, demoing that the economic system was and still is experiencing the sick effects of the planetary economic state of affairs. There are many different faiths practiced freely in Germany under the basic jurisprudence and they all pattern monotheism which concludes they all believe in one supreme higher being. The figure one faith is Christianity with about 67 per centum who are chiefly located in southern and eastern Germany. The figure two faith is Islam at around 4 per centum, most of whom are immigrants from Turkey. The remainder of the spiritual sector is made up of largely Buddhism and Judaism. There is besides a strong population of Germans who believe there is no God and pattern Atheism. Though most of the people in Germany do non go to church on a regular footing most still recognize spiritual ceremonials such as vacations, baptisms, matrimonies, and funerals. Some spiritual vacations include Good Friday, Easter Monday, Fronleichnam ( 60 yearss after Easter ) , and Weihnachten ( German name for Christmas ) . Though faith is practiced freely there are Torahs in topographic point that revenue enhanceme nt members of their several churches to assist fund any and all church related disbursals. This revenue enhancement can either be collected by the community the church is in or the province. If you are non portion of a church that collects these revenue enhancements so you merely do non hold to pay the church revenue enhancement. Marriage in Germany is typical to that of the United States as people are free to take who they marry which is known as love lucifer, while the type of matrimony practiced is a monogynist one, intending there is merely one partner. Their post-marital abode is neolocal, this is when the honeymooners get their ain place outside of the bride or grooms abode. Descent in Germany is unilineal, intending that affinity can be traced through either the female parent ‘s or father ‘s line. Germans refer to kin fundamentally the same manner that we do in the United States though distant relations such as 2nd cousins or great uncles have no specific differentiation. Kinship is of import to the German people and is shown most during vacations, household assemblages, and other of import parts in a individual ‘s life. The in-between category is the most prevailing societal category at about 54 per centum of the population, though there has been much noted to the fact that this cate gory is and has been acquiring smaller over the past old ages. Cultural groups in Germany consist chiefly of Germans at around 92 per centum, while 2.4 per centum are of Turkish descent, while the other class consists chiefly of Greek, Italian, Russian, Polish, and Spanish at about 6 per centum. Though adult females in Germany do hold equal rights they are still strongly leaned upon for childrearing patterns every bit good as twenty-four hours to twenty-four hours household responsibilities. Watching the picture â€Å" Romantic Germany † every bit good as questioning person who really lived in Germany truly helped me to better understand the civilization in which they live. Most big metropoliss every bit good as tourer finishs are located on one of the major waterways that flow through this state. Outside, in the hills of these metropoliss is where you will happen many household owned vineries every bit good as smaller pastoralist farms that house animate beings such as cowss and sheep. Lake Constance, the biggest lake in Germany is one of the most popular recreational and tourer finishs in Europe. It is located on the Rhine in the northern part of the Alps and is surrounded by neighbouring states Switzerland and Austria, there are besides many dumbly populated metropoliss along the seashore of this lake and you will most likely discovery farm animal graze in the hills of these metropoliss. One of the state ‘s most celebrated and recognizable festivals is Oktoberfest the universe ‘s largest just held every twelvemonth in Munich which consists of some 6 million participants in its 16 – 18 twenty-four hours entireness. The festival is known for its great nutrient, music, carnival drives, and beer imbibing. The chief athletics in Germany is soccer and you will ever hold an chance to take part as the state is home to over 1,000 club squads. Other popular athleticss in Germany include bobsleighing, luge, and skeleton partially because they are the lone state in the universe to hold four paths for each athletics. Other popular recreational activities include biking and boosting through the countryside. Germany ‘s most celebrated professional jocks include Boris Becker and Steffi Graf, both of which are former expansive sweep winning tennis participants along with former expression one universe title-holder Michael Schumacher. Bernard Langer is a erstw hile Masterss golf title-holder and former universe figure one golf player. Presently the most popular German jock executing in an American athleticss conference is former MVP and power forward for the Dallas Mavericks Dirk Nowitzki.

Importance of Political Socialization

There are many ways that our ideas are shaped and influenced as we grow up. This process by which we develop certain ways of thinking is called political socialization. There are three main influences which change and shape us being, the family, the mass media, and formal education. The family definitely has the greatest impact on us as we grow. This is primarily because ever since the beginning of childhood we are exposed to the ideas of our parents. Their ideas are the ideas that young children learn, and soon begin to form these ideas are their own. The saying that â€Å"You never get a second chance to make a first impression† holds true here in that this is what first the child is exposed to, and it is hard to get people to change from their original ideas of politics, or anything for that matter. In 1965 Jennings and Niemi selected a sample of high school seniors throughout the country and found that 58.9% of them had chosen the same party as their parents. Another influence on how people are shaped is the Mass Media. Today more and more people are spending more and more time watching television. The average grade school student spends more time watching tv than he or she does at school. The media has been called the â€Å"new parent† by some. However, the programs that would influence political opinion the most, such as the news, are rarely watched by the youth of today. The final major influence of people political socialization is their formal education or school. Countries have historically had government classes in their schools to â€Å"preach† the goodness of their particular type of government. For example, American children have been taught the virtues of capitalism and democracy for years. In Germany, during the Nazi era, children were taught how murders could be justified in certain situations. There are certain types of ways used to measure the public's opinion once they have been formed. There are usually samples that are performed instead of complete polls because it can save a lot of time. Scientific sampling is polling random people to form the general opinion of many people. In closing, it is evident by reading above that people today are influenced by the Mass Media, schools, and probably most importantly, families. Importance of Political Socialization There are many ways that our ideas are shaped and influenced as we grow up. This process by which we develop certain ways of thinking is called political socialization. There are three main influences which change and shape us being, the family, the mass media, and formal education. The family definitely has the greatest impact on us as we grow. This is primarily because ever since the beginning of childhood we are exposed to the ideas of our parents. Their ideas are the ideas that young children learn, and soon begin to form these ideas are their own. The saying that â€Å"You never get a second chance to make a first impression† holds true here in that this is what first the child is exposed to, and it is hard to get people to change from their original ideas of politics, or anything for that matter. In 1965 Jennings and Niemi selected a sample of high school seniors throughout the country and found that 58.9% of them had chosen the same party as their parents. Another influence on how people are shaped is the Mass Media. Today more and more people are spending more and more time watching television. The average grade school student spends more time watching tv than he or she does at school. The media has been called the â€Å"new parent† by some. However, the programs that would influence political opinion the most, such as the news, are rarely watched by the youth of today. The final major influence of people political socialization is their formal education or school. Countries have historically had government classes in their schools to â€Å"preach† the goodness of their particular type of government. For example, American children have been taught the virtues of capitalism and democracy for years. In Germany, during the Nazi era, children were taught how murders could be justified in certain situations. There are certain types of ways used to measure the public's opinion once they have been formed. There are usually samples that are performed instead of complete polls because it can save a lot of time. Scientific sampling is polling random people to form the general opinion of many people. In closing, it is evident by reading above that people today are influenced by the Mass Media, schools, and probably most importantly, families.

Life and Work of Herbert Spencer

Life and Work of Herbert Spencer Herbert Spencer was a British philosopher and sociologist who was intellectually active during the Victorian period. He was known for his contributions to evolutionary theory and for applying it outside of biology, to the fields of philosophy, psychology, and within sociology. In this work, he coined the term survival of the fittest.  In addition, he helped develop the functionalist perspective, one of the major theoretical frameworks in sociology. Early Life and Education Herbert Spencer was born in Derby, England on April 27, 1820. His father, William George Spencer, was a rebel of the times and cultivated in Herbert an anti-authoritarian attitude. George, as his father was known, was the founder of a school that used unconventional teaching methods and was a contemporary of Erasmus Darwin, grandfather of Charles. George focused Herberts early education on science, and simultaneously, he was introduced to philosophical thinking through Georges membership in the Derby Philosophical Society. His uncle, Thomas Spencer, contributed to Herberts education by instructing him in mathematics, physics, Latin, and free-trade and libertarian political thinking. During the 1830s Spencer worked as a civil engineer while the railways were being constructed throughout Britain, but also spent time writing in radical local journals. Career and Later Life Spencers career became focused on intellectual matters in 1848  when he became an editor for  The Economist, the now widely-read weekly magazine that was first published in England in 1843. While working for the magazine through 1853, Spencer also wrote his first book,  Social Statics, and published it in 1851. Titled for a concept of August Comte, in this work, Spencer used Lamarcks ideas about evolution and applied them to society, suggesting that people adapt to the social conditions of their lives. Because of this, he argued, social order would follow, and so the rule of a political state would be unnecessary. The book was considered a work of libertarian political philosophy, but also, is what makes Spencer a founding thinker of the functionalist perspective within sociology. Spencers second book,  Principles of Psychology, was published in 1855 and made the argument that natural laws govern the human mind. At about this time, Spencer began to experience significant mental health problems that limited his ability to work, interact with others, and function in society. Despite this, he began work on a major undertaking, which culminated in the nine-volume  A System of Synthetic Philosophy. In this work, Spencer elaborated on how the principle of evolution had been applied within not only biology, but in psychology, sociology, and in the study of morality. Overall, this work suggests  that societies are organisms that progress through a process of evolution similar to that experienced by living species, a concept known to as social Darwinism. In the latter period of his life, Spencer was regarded as the greatest living philosopher of the time. He was able to live off of income from the sale of his books and other writing, and his works were translated into many languages and read all over the world. However, his life took a dark turn in the 1880s, when he switched positions on many of his well-known libertarian political views. Readers lost interest in his new work and Spencer found himself lonely as many of his contemporaries died. In 1902, Spencer received a nomination for the Nobel Prize for literature, but did not win it, and died in 1903 at the age of 83 years old. He was cremated and his ashes interred opposite the grave of Karl Marx in Highgate Cemetery in London. Major Publications Social Statics: The Conditions Essential to Human Happiness (1850)Education (1854)The Principles of Psychology (1855)The Principles of Sociology (1876-1896)The Data of Ethics (1884)The Man Versus the State (1884) Updated by Nicki Lisa Cole, Ph.D.

Electricity Safety Research Paper Example

Electricity Safety Research Paper Example Electricity Safety Paper Electricity Safety Paper Essay Topic: City Lights 1. Introduce electricity.  2. Why is electricity dangerous? a) Relationship between current and voltage.   b) How a person completes a circuit.  3. Why is electricity useful?  4. How can you avoid accidents?  5. How can you help someone who got a shock?  6. How do we practice safety at home and school?  At home electricity runs the lights, television, toaster and more. Electricity is a form of energy. Energy is power, the power to do and move things, and to make things work. Electricity is made up of atoms. An atom centre includes at least one proton and neutron. At many a least one electron travels around the centre of the atom at a huge amount of speed. The movement of electrons produces electricity. There are many ways of finding electricity or getting electrified. There are also many kinds of electric types, for example static electricity. To learn about static electricity you have to learn about the nature of matter. In other words, what is all the stuff around us made of?  If you walk across a rug, and reach for the doorknob you will receive a static electric shock. Or, if you come inside from the cold, pull off your hat and all your hair stands on end. You will also receive an electric shock. The movement of electricity is very dangerous. If electricity travels through you, you could easily, seriously get hurt or even die. Electricity can travel through you, if you touch an electric circuit and the ground at the same time; you become electricitys easiest path.  You can avoid these kinds of accidents by keeping all electrical appliances away from water. This is because water is a great conductor of electricity. Another way to avoid is to make sure your hands are dry when you are about to anything electrical. An additional way to avoid electrical accidents is to not use water when putting out an electrical fire. However you should use a multipurpose fire extinguisher. A current is the flow of electrons. A voltage calculates how much energy the light bulb takes up, by calculating the energy before it reaches the bulb and after. The relationship between a current and a voltage is that both calculate electrons but in a different way. A current calculates the flow of electrons. However a voltage calculates the amount of electronic energy the bulb takes up.  For electricity to travel where we need it to travel, there must be a complete circuit of electricity. A circuit is like a circle. To complete a circuit you first need to connect one end of each wire to the light bulb base. Then you tape one free wire end to each end of the battery. In this experiment you need a cell battery, a volt light bulb, a light bulb base, masking tape, and a strand copper wire. Electricity is useful as I have written before that it runs the lights, television, toaster, and more. Its hard to even imagine what your life would be like without it. The more you know about how electricity works. The better you can keep yourself, your friends, and your family safe!  You receive an electric shock when an electric current enters your body. You can help someone when they get a shock in many ways. You can help someone who gets an electric shock by either shutting off the source of electricity if you can without hurting yourself. You can use a non-conducting object like a wooden broom if you need to break the connection between the person and the current. After you get that person no longer in contact with the current, check the persons breathing. If its rapid, irregular, or stopped, have someone else call emergency. If the person is fine look for burned skin, if he/she has no burned skin it could still be deep and painful in the inside.  You can practice safety at home by replacing frayed wires, when you are outside, especially after a storm, watch out for broken poles and downed wires, and make sure appliances are turned off when not in use. You can also practice safety at school by teachers teaching you. You could also practice safety at school by keeping a fair distance away from fire or electricity or even electric wires while doing an experiment and it is not turned off. Bibliography www.sciencemadesimple.com.

Capacity Strategy at Alden Products

Capacity strategy should embody a mental model of how a firm works in a given industry and geographic region. There are a series of assumptions and predictions about the log-term behaviour of markets, technologies, costs and competitor’s behaviour. Such a model would include the following factors: * Predicted growth and variability of demand for the firm’s products and services * Costs of building and operating different sized-facilities * Likely rate and direction of technological evolution Expected behaviour of competitors * Anticipated availability, capabilities and costs of external suppliers The European organization of Alden Products, Inc. is contemplating a doubling of unit sales over the next ten years. Their largest plant, located in Holland, was set up 25 years earlier to supply all demands of the EEC countries on the continent. It has since expanded six times. The question in mind pertaining to the case is that: * Should it expand again? * Should it build a new plant in Southern Europe? Or should it expand its use of contract fillers? As of 1988, 75% of Alden-Europe’s sales took place on the continent and 25% came from UK. Out of 75% of the continent, * 25% came from France, * 12. 5% came from Italy, * 37. 5% came from Spain and Germany Alden-Europe’s overall growth was expected to average over 40% per year but this varied across various countries. Thus, there was a high degree of uncertainty about the growth rate in several countries. The capacity strategy adopted by API was Policy C: Add Capacity Only after Demand Exceeds It. This policy implies that the company’s capacity plan will contain a negative cushion so that the likelihood of running short is greater than the likelihood of having excess capacity. As per my analysis of the scenario, I feel that API should expand at Uniplant based upon the following factors: How capacity and operations management will interact in case of expansion? An operation’s actual capacity is affected by some important factors. They are as follows: 1. Capacity is technology based: A number of Uniplant’s products used proprietary formulations and ingredients. Opening up a plant in new location would make the management get reluctant to risk the secrecy of these formulations. The same would be applicable if they would go ahead with contract fillers. 2. Capacity depends on the interaction of multiple resource constraints: Uniplant attains the following advantage over Southern Europe in matters like: * No additional land needed * Availability of labour * Fewer additional employees * Cost Advantage in terms of production of own plastic bottles Availability and long-term relationship with suppliers * Speed up the processing time . Capacity is location specific: Holland is a desirable place in terms of access to raw materials, proximity to markets via existing rail lines and highways, labour costs, tax rates and political and social stability. 4. Capacity is mix dependent: The capacity of the plant which was under 90% was greatly dependent on the production mix which included both the product mix and size mix. Different products/services consume different amounts of various resources, so a change in location could affect the product mix as the availability of the various resources could also differ. Capacity depends on management policies: The management was clear about the fact the product quality should be clearly distinguishable as superior to the competition in terms of performance, packaging and design finish. Hence by subcontracting, the company would increase the risk of reduction in quality and customer service and increase in indirect costs. 6. Capacity is affected by the degree of variability of demand: Sales in different countries were expected to grow at different rates. There were also changes predicted to occur in wage and exchange rates. Hence, an increase in the number of plants would just complicate the entire issue. In terms of sizing of capacity increments taking into account scale considerations, the company should attain long term economies of scale. This scale refers to the economies that arise from using one large facility rather than a number of smaller ones. This often results in savings because the processing capacity is roughly proportional to its interior volume and its cost is more closely related to the surface area in terms of where the materials and labour hours are concentrated. We also know that though there is a growth in demand, variability exists across different countries. Greater the variability, there are chances that there would be a greater amount of underutilized capacity and at this stage opening a new plant in a different location altogether could make the entire scenario vulnerable. Drawbacks of not opening a new plant in Southern Europe are as follows: * Loose an opportunity to tap a lower cost labour market * Reduction in transportation costs had a new plant come up in Southern Europe * Would not be able to offset the protectionist sentiment in both France and Italy. Thus we see that by adopting the option of expansion at Uniplant, the company would be in a better state as compared to the other options. However a few recommendations in terms of changes to be mad in the expansion plan are provided below: Uniplant’s mark-up price should be reduced from 10% to 5% initially and then become nil in mere future. This would increase the number of sales from the customer point of view and would also help other countries to price their products competitively even during times when there is any kind of fluctuation in exchange rates. They should equalize the unit transportation costs to all subsidiaries which would make the entire process less complex and fair. This would help in maintaining long term relationships with them. Standardized products could be subcontracted but products involving high-technology shouldn’t be under contract filling as this could increase the risk of quality deterioration and increase in indirect costs.

Cross-Cultural Transaction Management Essay Example | Topics and Well Written Essays - 1500 words

Cross-Cultural Transaction Management - Essay Example The Chinese space for individuals to make decisions appear to experience some direct influence from the government, the US has a liberal space for individuals to decide on many issues without a direct influence from the government. Politics around the social scene affects the cultural definition between the two countries with the Chinese culture being closely monitored and dictated upon by the strong political forces. The US democratic model is perhaps one of the most liberalized in the world making it one of the leaders in the most favored nation (MFN) in economic terms. In contrast, the Chinese political setting has been a socialist model that appears to be on the opposite end when compared to democracy, which depicts the setting as intolerant of democratic values and principles. Entering the Chinese market to set up shop is likely to be subjected to tight government bureaucracies than in the US. The government cronies found all over China may pose the greatest challenge to setting out investment due to their political inclination thereby affecting foreign investment. In addition, the highly patriarchal cultural system that is established in the political arena hinders the role of women in Chinese economy.The Motosuzhou management makes are defined by high political influence right from the organization structure. Considerations of the political influence that the Electrowide joint venture may have on the Chinese foreign policy of isolation based on its government structure come into the equation.... that the government has accorded Motosuzhou along side other 1000 companies in terms of liberal decision making, the role of Minister of Finance in the internal structure contradicts this assumption. Socialist model of the Chinese culture that emphasizes on understanding social attributes of the negotiation panel forwarded by Electrowide also consumed a lot of time that would otherwise have made progress in terms of the Americans’ estimation. Gender discrimination of female negotiator in the Electrowide team was not welcome from the Americans causing more frustrations. Negotiations failure between Electrowide and Motosuzhou Joint venture negotiations must contemplate the selection criteria of a partner for success in such negotiations, which were heavily compromised in the Electrowide and Motosuzhou case. During the negotiations, it was not clear what each partner was willing to obtain and offer as part of the joint venture. The Chinese team acted casually and did not utilize the time as the American team expected during the negotiations. Several assumptions were made by both parties which were not the exact positions of the intended entry strategies for the other parties. The accounting policies that the two firms applied in their operations were very different, for instance, in the treatment of manufacturing costs and their allocation in the books. For better performance of the joint venture, it is important that the internal operations of the firms are not very different for purposes of harmonizing the joint operations. As it also appeared in the disparities, Motosuzhou did not strictly comply with audit rules which are fundament in American corporate operations. Thirdly, communication is a basic necessity in the negotiations of a joint venture as well as during

Homework5 Essay Example | Topics and Well Written Essays - 500 words

Homework5 - Essay Example 3. The borrower might be required by the lender to pay the reinstatement expenses and sums in the form of money order, cash, certified check, bank check, cashier’s check, and treasurer’s check. Provided any of the checks is drawn from a firm having deposits that are insured by entity, federal agency, and instrumentality. The expenses can also be paid via Electronic Funds Transfer. When the borrower is reinstated the security obligations and instruments will remain effective as if no acceleration had taken place. 4. Borrower is not allowed to store, use, dispose, or release any substance that is hazardous on the property. Borrowers shall not permit any activity that will violate the environment’s law, condition, or creates a condition that will affect the property’s value. 5. The lender must cover the default, the remedies for curing the default; date from the time the borrower was issued with the notice. Also, the notice covers the failure for curing the default on or before the specification date in the notice. Failure may result to acceleration of secured sums secured by the security instruments and the property’s sales. The notice also informs the borrower’s right to reinstate in case of acceleration An interest-rate cap dictates the maximum amount an interest rate can raise. The interest caps can either be periodic or overall caps. Periodic caps limit the increase in interest rate from an adjustment period to the other. Overall caps limit the increase in interest rate over the life of a loan. All adjustable rate mortgages must have periodic and overall caps. Supposing the Adjustment-Rate mortgages has a periodic cap of 2%. During the first adjustment the index rate increases by 3%. Computations will be as When the interest rate drops, the monthly payment does not always drop. Adjustment rates having the periodic caps, their amount of payment might increase although their index rate

Medical case study report Example | Topics and Well Written Essays - 250 words

Medical report - Case Study Example current medication include; Excelon 4.6mg/day, Warfarin  10/11 night, Ezetrol  10mg evening, Vitamin D 2000IU Daily, Panadol osteo 2x665 mg PRN, Dutasterid 0.5mg and Sinemet  (levadopa+carbidopa)100/25   5 pills a day. The patient falls of a chair and x-rays show blood clots on left knee and is administered Warfirm for AF, physiotherapy and dressing of the wound and blisters [1] This disease is characterized by loss vision sharpness, dry eyes as the disease progresses due to changes in the movement of the eyeball, similar to other motor symptoms caused by loss of dopamine neurons. This result into; trouble reading, the need to blink in order to change eye position, trouble opening the eyes voluntarily, known as apraxia, Eyelid spasms - blepharospasm, and excessive blinking, Dry eyes;  people with PD may blink only 1-2 times per minute, leading to itching and burning [2]. Changes in Perception includes: decreased sensitivity to contrast due to los of dopamine neurons in retina, color blindness, difficulty judging distance and people’s facial expressions and visual hallucinations due to medications. Advanced PD could also result into development of delirium due to prolonged medications. People with Parkinson’s may also have bladder problems, the need to urinate, even when the bladder is not full thus there is need to rule out the possibility of urinary infection or any immediate medical issue before administering a medication [3]. Carbidopa/Levodopa- Smaller doses of levodopa are required to prevent its side effects and being converted into dopamine in the blood stream and reduce nausea and vomiting and prolonged use also cause dyskinesias.Dopamine Agonists and includes: Pramipexole, Ropinirole, Rotigotine, Bromocriptine. These medications tricks the brain to think that it is receiving the dopamine it requires and is less likely to cause dyskinesias but cause other side effects such as hallucinations, nausea and sedation [4]. Anticholinergics

The objective of the marriage statutes and same sex marriage Essay

The objective of the marriage statutes and same sex marriage - Essay Example tural justice for those responsible for formulating the statutes were expected to have foreseen the problem and adequately address it even before it happened. There is no way the marriage statutes could forbid same sex marriage giving clear definitions of marriage and what society should take it to be in some clause and then intentionally give another contrary idea of what marriage is in its subsequent definitions of marriage without raising any debate (Eskridge, 2001, 853-881). The idea of the marriage licensing laws not prohibiting same sex marriage can be taken as an intention to undermine the inefficiency of grammar in those laws to completely substantiate the object of the encompassing or parent law which is the marriage statute, the object being protection of marriage between people of different sexes for purpose of procreation. This led to existence of a loophole where people of differing opinions could create grounds of making believe the constitutional law is ambiguous in it s intentions thereby creating a constitutional avenue through which same sex marriage thrive (Snyder, 2006, 35). By passing that law the intention of the law was subverted and ordinary and approved use of language principle of interpretation of law was misused to beat the very intention of the law. The intention of the marriage statute is clear; the marriage licensing laws are a mere branch through which the objectives of the marriage act are attained and implemented. The marriage statute does not have a provision to indicate that it might have any other differing opinion based on how it substance is interpreted in its subsequent implementation. The meaning of marriage in the laws of Massachusetts can be taken to be silent and its true intent can only be arrived at when subjected to... This essay analyzes that the court's solution to this case far exceeded its jurisdiction mandated by article 30. It amounted to statutory revision when the court interpreted the gender-specific language as gender neutral which resulted into a statutory revision that replaced the intent of the legislature with that of the court.  This essay analyzes that the court's solution to this case far exceeded its jurisdiction mandated by article 30. It amounted to statutory revision when the court interpreted the gender-specific language as gender neutral which resulted into a statutory revision that replaced the intent of the legislature with that of the court.   It is clear that same-sex marriage has always been forbidden under the marriage statutes and that the court of Massachusetts abrogated the purpose of the substantive due process which is to protect existing rights and not create new ones, to deter government intrusion and not invite it. The Court should not have sanctioned same-s ex marriages giving a rationale that denying such a right would be tantamount to denying other rights such as raising children that are accorded under marriage. The legislature needs to have had some rationale basis to conclude that family structures of such nature have not been sufficiently concluded to be an equivalent of marital family structure that has established itself as a successful one through out history. People have the right to raise children in any manner of family structure as long as they don’t pause any danger to them socially psychologically or otherwise.

Topical Tax Issue Essay Example | Topics and Well Written Essays - 1500 words

Topical Tax Issue - Essay Example The guidelines are intended to replace the previous poverty proofing guidelines issued by the department of social and family affairs and in this article are referred to as poverty impact assessment guidelines. The poverty impact assessment process aims at identifying the impact of policy proposal on those experiencing poverty or at risk of falling to poverty so that this can be given proper consideration in designing or reviewing the policy. The process does not intend to fundamentally transform policies to target visibly the disadvantaged but are aimed to identify anticipated negative impact and put measures to counterbalance such impacts. Moreover, positive impacts are also identified so that they can be improved. As included in Budget 2007, these social welfare measures will benefit taxpayers at the lower bracket of income distribution. This is because the absence of such measures may lead to these taxpayers experiencing a significant deterioration in their income in relative terms. Analyzing these measures on the view of combined effect of social welfare changes and tax changes, they highlight that the most significant net income gain are to those on the lowest incomes. It indicates that much smaller gains will be to those in the middle to high income brackets. Proper analysis of these tax measures reflect that Budget 2007 is progressive in nature as it sees those dependent on the welfare are to accrue the greatest gains. Budget 207 ensure s that the lowest income groups gain more progressively that is from welfare payments as compared to higher income groups who are main progressive contributors to the cost of public service provision. The resources targeted by Budget 2007 are over 55% in the personal income tax package to those on low incomes as well as the elderly, widowed taxpayers and those with disability or under care of a person with disability. Taxpayers at the lower end of income distribution will as well benefit from taxation measures if they are to become exempt. This is due to the fact that the entry point to taxation has been increased in Budget 2007. The basic personal tax credit and the employee tax credit was increased by Budget 2006. This was meant to ensure that the minimum wage in its annualized form was placed outside the tax net. At the end of 2006, the position still remained as a key government's aim on tax policy and continues to be met. The entry level to taxation was increased in budget 2007 through substantial increases in personal tax credit and the employee credit. For instance, entry point for a single employee below 65 years, the personal tax credit and the employee credit was increased by almost 13% in Budget 2007. This is a sufficient increase as it ensures that the minimum wage per hour is increased and therefore its annualized form will not be liable to income taxation. Moreover, employee's health levy was increased to ensure that taxpayers in low income bracket were not liable for the levy. The income tax changes announced in Budget 2007 to the extent that they apply are intended to have a significant beneficial impact for those on low incomes. This is because those in low incomes will receive additional payment for each child below six years of age in comparison with previous years. In conclusion, Budget 2007 income tax measures are intended to improve

Medical case study report Example | Topics and Well Written Essays - 250 words

Medical report - Case Study Example current medication include; Excelon 4.6mg/day, Warfarin  10/11 night, Ezetrol  10mg evening, Vitamin D 2000IU Daily, Panadol osteo 2x665 mg PRN, Dutasterid 0.5mg and Sinemet  (levadopa+carbidopa)100/25   5 pills a day. The patient falls of a chair and x-rays show blood clots on left knee and is administered Warfirm for AF, physiotherapy and dressing of the wound and blisters [1] This disease is characterized by loss vision sharpness, dry eyes as the disease progresses due to changes in the movement of the eyeball, similar to other motor symptoms caused by loss of dopamine neurons. This result into; trouble reading, the need to blink in order to change eye position, trouble opening the eyes voluntarily, known as apraxia, Eyelid spasms - blepharospasm, and excessive blinking, Dry eyes;  people with PD may blink only 1-2 times per minute, leading to itching and burning [2]. Changes in Perception includes: decreased sensitivity to contrast due to los of dopamine neurons in retina, color blindness, difficulty judging distance and people’s facial expressions and visual hallucinations due to medications. Advanced PD could also result into development of delirium due to prolonged medications. People with Parkinson’s may also have bladder problems, the need to urinate, even when the bladder is not full thus there is need to rule out the possibility of urinary infection or any immediate medical issue before administering a medication [3]. Carbidopa/Levodopa- Smaller doses of levodopa are required to prevent its side effects and being converted into dopamine in the blood stream and reduce nausea and vomiting and prolonged use also cause dyskinesias.Dopamine Agonists and includes: Pramipexole, Ropinirole, Rotigotine, Bromocriptine. These medications tricks the brain to think that it is receiving the dopamine it requires and is less likely to cause dyskinesias but cause other side effects such as hallucinations, nausea and sedation [4]. Anticholinergics

Topical Tax Issue Essay Example | Topics and Well Written Essays - 1500 words

Topical Tax Issue - Essay Example The guidelines are intended to replace the previous poverty proofing guidelines issued by the department of social and family affairs and in this article are referred to as poverty impact assessment guidelines. The poverty impact assessment process aims at identifying the impact of policy proposal on those experiencing poverty or at risk of falling to poverty so that this can be given proper consideration in designing or reviewing the policy. The process does not intend to fundamentally transform policies to target visibly the disadvantaged but are aimed to identify anticipated negative impact and put measures to counterbalance such impacts. Moreover, positive impacts are also identified so that they can be improved. As included in Budget 2007, these social welfare measures will benefit taxpayers at the lower bracket of income distribution. This is because the absence of such measures may lead to these taxpayers experiencing a significant deterioration in their income in relative terms. Analyzing these measures on the view of combined effect of social welfare changes and tax changes, they highlight that the most significant net income gain are to those on the lowest incomes. It indicates that much smaller gains will be to those in the middle to high income brackets. Proper analysis of these tax measures reflect that Budget 2007 is progressive in nature as it sees those dependent on the welfare are to accrue the greatest gains. Budget 207 ensure s that the lowest income groups gain more progressively that is from welfare payments as compared to higher income groups who are main progressive contributors to the cost of public service provision. The resources targeted by Budget 2007 are over 55% in the personal income tax package to those on low incomes as well as the elderly, widowed taxpayers and those with disability or under care of a person with disability. Taxpayers at the lower end of income distribution will as well benefit from taxation measures if they are to become exempt. This is due to the fact that the entry point to taxation has been increased in Budget 2007. The basic personal tax credit and the employee tax credit was increased by Budget 2006. This was meant to ensure that the minimum wage in its annualized form was placed outside the tax net. At the end of 2006, the position still remained as a key government's aim on tax policy and continues to be met. The entry level to taxation was increased in budget 2007 through substantial increases in personal tax credit and the employee credit. For instance, entry point for a single employee below 65 years, the personal tax credit and the employee credit was increased by almost 13% in Budget 2007. This is a sufficient increase as it ensures that the minimum wage per hour is increased and therefore its annualized form will not be liable to income taxation. Moreover, employee's health levy was increased to ensure that taxpayers in low income bracket were not liable for the levy. The income tax changes announced in Budget 2007 to the extent that they apply are intended to have a significant beneficial impact for those on low incomes. This is because those in low incomes will receive additional payment for each child below six years of age in comparison with previous years. In conclusion, Budget 2007 income tax measures are intended to improve

Review of the Child Protective Services Investigation Process Essay Example for Free

Review of the Child Protective Services Investigation Process Essay In the beginning of 2004, the tragic death of a young boy in San Antonio, TX raised concerns about Texas Department of Protective and Regulatory Services (TDPRS) procedures relating to the investigation of the child protective services (CPS) process, including responding to telephone reports and assessing the risk of maltreatment accurately. TDPRS is currently under investigation ordered by the Governor, Rick Perry. The Governor stated, there is enough evidence from various parts of the state to suggest that some of our most vulnerable children are not receiving the protection they need from abusive situations. The evidence leads me to believe we have a systemic breakdown in the safety net that must protect abused children (www.governor.state.tx.us July 1, 2004). This paper examines current procedures in the investigation process and provides recommendations for improvement related to several of the details and feature of the operations process. Reinventing government initiatives draw heavily on supply chain management, total quality management, business process reengineering, and just-in-time delivery concepts that fall under the Operations Management umbrella.(Chase, 2003). Because this review is narrowly focused on the CPS investigation process, there are several essential elements of child welfare services that are not addressed in this paper, including substitute care and permanency services. OVERVIEW OF FUNCTIONAL AREAS The overall goal of CPS is to protect the unprotected children from abuse and neglect. This report focuses on specific CPS functions and crosscutting themes. These functions are those that comprise the child protection response to allegations of abuse and neglect. Operational definitions described in this report include: * Screening and Intake the process by which CPS receives a referral and a report concerning allegations of child abuse or neglect, and decides whether or not to respond to the referral and report. * Investigation the process by which CPS determines whether child maltreatment has occurred or if a child is at risk of maltreatment, and the decisions and actions that are needed to ensure the childs safety. * Other CPS Response and Alternative Response a response to an allegation of abuse or neglect that assesses the needs of the child or family with or without requiring a determination that maltreatment has occurred or that the child is at risk of maltreatment for the purpose of providing the family with services. For each function, there are several different features. The workflow of these functions is described in Table 1. SCREENING AND INTAKE Receiving community referrals, which includes those from mandated professional reporters and the population at large, is the gateway to CPS. Features of the intake procedures include the availability to receive reports, methods for documenting reports, and timeframes for accepting and forwarding a report. Intake is available 24-hours a day 7 days a week, and centralized in Austin, TX. Referred reports are generally categorized into two groups. In the first group, CPS caseworkers are dispatched immediately for children believed to be in imminent risk of harm. In the second group, investigations are usually initiated within 10 days. The policies indicate that a decision protocol for forwarding cases for investigation. The hotline workers conduct quality assurance (QA) reviews on each case and decision to forward a case to investigation is made with supervisor approval. In case of sexual abuse and serious abuse, the case must be notified to law enforcement. INVESTIGATION The investigation function addresses the process of determining whether a child has been maltreated or is likely to be maltreated, and if services are needed to ensure the child will not be harmed in the future. TDPRS implemented the use of risk and safety assessment (IRA) as tools to guide decision-making as to when and how to intervene to keep children safe in the immediate future and to reduce long-term risk. The result of IRA was included at case closure, during case planning at any major decision point, or whenever circumstances suggest a childs safety is at risk. Investigators usually check if the childs family has had a prior validated report of abuse or neglect. Investigators then visit and interview the family, including initiating face-to-face contact with the children, and begin collecting information about the alleged maltreatment incident. If an investigator, during the initial investigation, believes that a child has been maltreated and needs the court to protect the childs safety, the investigator must initiate judicial oversight of the case, which can be time-consuming and complicated. While the investigator is following the procedures involved in investigating the alleged maltreatment, he or she is also developing a tentative plan to address those conditions in the home that CPS believes contributed to the maltreatment of the child. This plan ultimately becomes the case plan that outlines treatment services for the child and the family. The plan described what actions are required of all the parties involved to correct the condition that caused the maltreatment. OTHER CPS RESPONSE AND ALTERNATIVE RESPONSE The overall goals of alternative response are to provide a response option to those families whose situations did not meet the mandate or criteria for CPS involvement, to serve low-risk or low-severity situations, or to improve family situations. This is to emphasize partnering the families with the community and creating a network for the family, protect children and assist parents to recognize and remedy conditions harmful to their children, provide preventive services before the need of CPS involvement is required, and prevent the family from potentially being re-referred. The causes of child abuse and neglect are complex, and a case plan can involve referrals to an array of individuals, including caseworkers from other units in the agency, private service providers such as mental health and counseling professionals, other public agencies such as housing and transportation services. CURRENT WORKFLOW Documenting business process flows visually not only helps in ISO and QS initiatives, but it is the first step toward continuous improvement. (Gould, L. 2000) A good way to start analyzing a process is with a diagram showing the basic elements of a process (Chase, 2003) Table 1 describes the overview of current workflow from the time the report of maltreatment was reported to CPS until the completion of the investigation. Table 1 UNDERLYING PROBLEMS Because child protection is a critical service and because of the seriousness consequences of errors, CPS must seek to insure the quality, timeliness, and accuracy of the process both through detailed specifications (laws, regulations, and policy) and thorough supervisory oversight. However, the process must be balanced with systems that give workers and supervisors sufficient flexibility to apply sound professional judgment. Increases in the number of maltreatment cases, the changing nature of family problems, and long-standing systemic weaknesses have placed the CPS system in a state of crisis and undermined its ability to fully carry out the responsibilities for abused and neglected children. First, child maltreatment reports have risen steadily across the state. The caseloads of CPS have grown correspondingly, and CPS cannot keep pace with this workload. Second, these caseloads are increasingly composed of families whose problems have grown more troubling and complicated, with substance abuse a common and pervasive condition. Finally, systemic weaknesses, such as difficulty maintaining professional and skilled workforce, inconsistently implementing policies and procedures, and poor working relationships with outside resources has created a long-standing problems. The combined effect of difficult caseloads and systemic weaknesses may endanger the lives of children coming to the attention of CPS. In CPS, the staff sometimes deal with life-and-death issues, the knowledge of and consistent application of appropriate policies and procedures are critical. However, CPS staff is unable to consistently apply existing policies such as inadequate safety assessment. This is because policies change frequently, no procedures manual exists, and information is inconsistently distributed to all staff. By necessity, CPS should work efficiently and effectively with outside resources to protect children. However, the outside resources, like CPS, also face problems associated with the large volume of increasingly complex cases, budget cuts, and Medicaid reform. Unnecessary time spent to transfer or refer cases diverts the investigator from performing investigative activities on other open cases and create congestion in workflow. COMPARE AND CONTRAST WITH OTHER PRACTICE In 1994, Missouri developed a new strategy to handle the overwhelming number of reports coming into its CPS system. Missouri recognized that state government, acting alone, had neither the resources nor the local community, neighborhood, or family base to effectively alter the cycle of abuse and neglect. The agency and local CPS offices have turned to the broader community of churches, schools, mental health providers, and others to expand their reach. By developing partnerships with these community groups, CPS is able to quickly increase the number of people available to serve children and their families, without increasing CPS staffing levels. The model in this state is also based on the premise that not all CPS cases require the same traditional approach. Instead, the models incorporate a flexible response, whereby CPS cases can be grouped according to the nature of the allegation, recognizing that different types of allegations required different responses. RECOMMENDATIONS Build Community Partnership Different types of maltreatment require dramatically different prevention and treatment strategies. It is critical for CPS to form partnerships between CPS and community service providers. This will allow the cases to be referred and transferred more smoothly and in a timely manner. However, ultimate success will depend on the CPS staffs ability to overcome certain challenges, such as developing willingness within the community to become more active in protecting children from maltreatment and to adapt to new roles and responsibilities. Refine the Key Performance Requirement Key Performance Requirements How to Achieve These Requirements Report Receipt (Intake) * Community awareness of when and how to report * Minimal wait to reach the intake workers * Effective use of the CAPS (agency computer system) * Enhanced phone system that provide real time information, manage call distribution to available workers, and support estimation of staffing requirements Screening * Immediate response to high risk situations * Reasonable timeliness of decisions on other situations * Sound screening decisions * Screening guidelines that provide consistent direction * Immediate access to relevant information system * Real-time consultation from experienced supervisors Assessment (Investigation) * Sufficient thoroughness; reasonable and prudent efforts made to obtain relevant information * Timeliness of decisions * Decisions consistent with information and with policy * Assessment guidelines that provide consistent direction * Assessment timeliness requirements that balance thorough information gathering with responsiveness * Reasonable caseloads and adequate number of staff * Accessible consultation from experienced supervisors Management Reporting * Information that enables management to make sound judgments regarding overall performance and other matters, such as staffing requirements * Information that enables supervisors to manage caseloads and monitor quality and timeliness * Use of the information to identify targeted improvements where needed * Real-time information about on-going cases * Reports on both the detailed (by worker) and summary (by unit) level on caseloads and case status (pending, deadlines, overdue, etc.) * Reports of quality assurance findings * Designation of specific performance measures that will be tracked and monitored with comparisons across local offices * Management reports on overall program performance including workload, timeliness, quality assurance results, investigation outcomes, list of outside resources, etc. CONCLUSION TDPRS is facing increased reports of child abuse and neglect, as well as a disturbing increase in the number of families with severe and multiple problems. The burden to improve the ways CPS responds to children at risk of abuse and neglect falls on state and local governments. When a process is operating at capacity, the only way to take on more work without increasing the waiting time is add more capacity (Chase, 2003) CPS management must recognize that the traditional approaches to child protection cannot keep pace with the demand for services. CPS needs to reach out to communities to establish partnerships among service providers, as well as our citizens. Furthermore, the CPS management team must look at the entire workflow of the operations process and recognize long-standing systemic problems. It is critical to seek ways to correct deficiencies and to build and maintain the personnel that will support the operations management strategies. REFERENCES: Chase, R. (2003). Product design and process selection. Operations Management for Competitive Advantage, Tenth Edition. The McGraw-Hill Companies. Chase, R. (2003). Operations strategy and management change. Operations Management for Competitive Advantage, Tenth Edition. The McGraw-Hill Companies. www. tdprs.state.tx.us www.governor.state.tx.us Gould, L. (2004) Designing a better business. Gardner Publications, Inc. Retrieved from www.autofieldguid.com on 8/23/04 McDonald W. (2001). National study of child protective services systems and reform efforts Literature review. Retrieved from www.aspe.hhs.gov.hsp/protective01/ on 8/22/04. http://www.gao.gov/archive/1997/he97115.pdf

The Inventory Management System

The Inventory Management System When a business stocks materials and goods they sell, they are procedures that are put in place to handle how goods are received, stored and delivered, with this process been known as inventory management. Inventory is a physical resource that a business holds in their stock with the intention of selling it or transforming it into a more valuable state. The inventory could range from raw materials, finished goods, works in process or maintenance, repair and operation (MRO). The main concept of inventory control is focusing on the process of movements and accountability of inventory. This concept strictly bases on the principle of physical and cycle counting, physical and systematic movement of materials and, good accounting practices. In business management, inventory consists of a list of goods and materials held available in stock. Inventory management is the process of specifying the placement and size of the stocked goods within a business whereby the inventory is to be managed at different locations or levels within a facility or within multiple different locations of a supply network to safe guard production against overstocking or running out of goods. Inventory management could as be defined as managing inventory with the primary objective been determining and controlling stock levels within the facility to balance the need for product availability against the need for minimizing stock holding and handling costs. 2.3 Management System A management system is an information system that is used by a business to ensure they can manage and fulfill their tasks through a framework of procedures and processes. Typical management systems are used to maintain data within an organization as well as ensuring data is shared accurately, or for the management of services or products offered. A management system could also be defined as the integration of traditional management methods with a computer system to create a tool for strategic and automated information management. 2.4 Inventory Management System An inventory management system is usually used to automate a sales order fulfilment process. These types of system are designed containing a structure whereby it contains lists of orders to be fulfilled then prompts the sales employees to select the desired items and mark them packaging and shipping information. Modern inventory management system serve the purpose of keeping tracks of inventory objects whereby the system relies on barcodes or RFID tags to uniquely identify the object. When recording a transaction, the system automatically identifies the inventory object by scanning the barcode or RFID tag, and then additional transaction information is collected from the operator via work terminal which could be a workstation or mobile computer. The features of an inventory management system such as physical inventory counting and cycle counting can enhance an organization. With the availability of various kinds of inventory systems, in the current environment the size of a business is not a concern because there are various kinds of systems to suit any business. Figure 1: Basic Structure of an Inventory Management System 2.5 Management System Classification 2.5.1 Network Inventory Management System Real time inventory management system: use wireless, mobile terminals to record inventory transactions, the moment the transaction is processed. Transaction information is transmitted via wireless LAN to a central database. 2.5.2 Stand Alone Inventory Management System Stand alone inventory systems are usually employed by small size or medium sized businesses. These kind of systems work offline and are not connected to other systems. Stand alone systems are usually used to store Customer data and inventory, usually all stored on one local database. For example for small businesses like convenience stores and shoe stores, it could be an expensive business option to purchase and use an expensive electronic inventory management system hence a standalone application could be the nearest option to the manual system since it automates the basic functions of inventory management. It would not make sense a small business located in one location implementing a web based or network based inventory system when they only sale inventory locally. These kinds of systems are not suitable for large sized business in manufacturing or production with a study in 1996 by the International Mass Retail Association (IMRA), for example, concluding that stand alone manageme nt system packages acquired to perform individual functions will soon become obsolete because they do not integrate well with other systems. 2.5.3 Web Based Inventory Management System Web based systems are web applications that can be accessed from any computer with a web browser but without any physical application installed on the local computer. In inventory management systems, a web based application can be a smart move for businesses because it offers the benefits of secure storage, sharing files and accessibility which make managing your data with other hosted applications a smart strategy. A web application is an application delivered to users from a web server over a network such as the internet or an intranet. A reason for the popularity of web based applications is due to the functionality of the web browser as a client, sometimes called a thin client. When choosing inventory management applications, the ability of a web based application to update and maintain web applications without distributing and installing software on potentially a numerous number of clients is another reason why these kinds of system are becoming much favored by users. A key strategy that is been capitalized on by software companies is to provide web access to applications that are been distributed as local applications whereby these programs allow the user to pay a monthly or yearly fee for use of the application without having to install it on a local hard drive. Software companies that are following this strategy are known as an application service provider (ASP), and ASPs are currently receiving much attention in the software industry. The main concepts behind web based application is to centralize information hence by using databases to store data like consumer information, salespeople can update a clients address and the update will instantaneously be available to all users throughout the organization. Too many small and medium-sized businesses suffer from de-centralized information because they implement stand alone applications which are not a logical way of centralizing information. 2.6 Current Based Inventory Management System 2.6.1 Silver Inventory System Silver Inventory System is very popular software throughout the world, particularly with small to medium sized businesses requiring a mid-range, inexpensive standalone inventory software with a good range of features. Silver Inventory System is a complete inexpensive system for management of sales, purchases and payments. This system will help you in creation invoices, sale orders, purchase orders, receiving lists, payment receipts, product labels with bar codes and any kinds of the reports for monitoring your business. Inventory System allows the control of customer balances and vendor balances. Figure 2: Screenshot of Silver Inventory Management System 2.6.2 Golden Inventory System Golden Inventory system is integrated with QuickBooks and is able to track Purchases, Sales, Work Orders and payments. This is a complete inventory management system that performs the functions of Purchases, Sales and payments. The system guides you through the creation of vendors list, purchase orders, products list, receiving lists, sales orders, invoices, sales and payment receipts. In addition to product labels with barcodes, work orders for creation inventory assemblies, transfer orders between locations, customers and vendors balances and various types of reports for monitoring your business, it also supports XML synchronization with remote locations. Golden Inventory system works with MS SQL Server 2000, MSDE and desktop database files. Golden Inventory system works as a single application or as a client server system and as a distribution database system. You will be able to work with remote outlets and warehouses even without a reliable connection between them. The system us es unique data exchange technology in XML format that allows quickly processing orders and synchronizing information with all your branches. Figure 3: Screenshot of Golden Inventory System Features Golden Inventory Silver Inventory User interface Easy to understand interface that can be used without need for training. Application offers a simple to use interface, that could be used to perform tasks without the need of training Warehouse support Application can be integrated to support multiple warehouses for one company Support for warehouse is only limited to one warehouse for one company Point of Sale System has a point of sale panel where a sales transaction can be performed in real time Does not provide functionality for Point of Sales Security Users access functions can be limited depending on access level or role Secure security prevents unauthorized access from outsiders. Integration Supports a multi user environment Supports a multi user environment Inbound logistics Systems allow ordering for manufacturing operations. It also supports payments for ordered products and purchase orders at the same time reserving inventory for sales orders This system allows conducting payments for obtained products and for ordered products in the purchase orders. It supports the partial payments and payment under several orders or receiving lists. The payments arriving from sold products are similarly ensured. Other features Inventory reservations for Sale orders Work orders for manufacture operations Screen customization support Export reports in Excel files Compare and Comparison of Golden Inventory system and Silver Inventory System When comparing the inventory systems there certain features that feature in both systems and there some features that are absent in the other system. One of the key differences between the two systems is that Golden Inventory system supports multiple warehouses for a company meaning the system could be integrated between all warehouses as one system whereas the downside to Silver inventory is that it can only be integrated to one warehouse. A similarity between the two is that both can support multiple companies. In terms of size and functionality, Golden Inventory system is much superior to Silver Inventory system. Both systems offer the basic concepts of inventory management systems that is, invoicing, sales orders which is fulfilled by business, purchasing which would be the inbound inventory, barcode scanning whereby the inventory object is automatically identified before it is processed. Depending on the size of the business, Golden Inventory system is most suited for a large size business that could be in the field of manufacturing, stock supply or production and Silver Inventory is best suited for small to medium sized business because of the limited functionalities. Some of the key features that make Golden Inventory superior to Silver Inventory system are that Golden Inventory system can offer a Point of Sale Option whereby a transaction could be processed at a terminal and the inventory status is updated in real time. Golden inventory system can support reports from Microsoft Excel which means it can be integrated with other systems that could be run by a business. The Golden Inventory System has a feature to manage work orders for manufactures and the screen and work permissions by user meaning the added security whereby the access granted to each user can be defined exactly depending on their level of authority minimizing unauthorized access to functions and data not related to that user. REFERRENCES http://www.executivpro.com/#silver Silver Inventory System Software Informer: Screenshots http://www.softsea.com/review/Golden-Inventory-System.html http://www.softsea.com/review/Hunter-Perrin%27s-Inventory-Manager-and-Storefront.html http://www.sharewareconnection.com/golden-inventory-system.htm http://www.patentstorm.us/patents/6647380/claims.html http://www.daniweb.com/forums/thread50946.html# http://findarticles.com/p/articles/mi_m4153/is_6_57/ai_69759746/ http://www.ehow.com/how_4421818_set-up-inventory-control-system.html http://www.barcodesinc.com/articles/inventory-control-system.htm http://www.retailsystems.com/retail-inventory-management-system.cfm http://www.womensenterprise.ca/resources/downloads/inventory-wholesale-retail.pdf http://www.seminarinformation.com/qqbpml/conference-for-warehousing-and-inventory-control http://en.wikipedia.org/wiki/Warehouse_management_system http://www.thefreedictionary.com/inventory+control http://www.management-hub.com/benefits-of-using-an-inventory-management-system.html http://www.management-hub.com/is-it-wise-to-go-for-web-based-inventory-management-solution.html http://www.management-hub.com/use-of-network-inventory-management-software.html http://en.wikipedia.org/wiki/Network_management_software http://www.ricelake.com/docs/prodinfo/white-papers/wp_IMS.pdf http://www.emco.is/products/network-inventory/advantages.php http://www.askdeb.com/inventory-management/hosted/